28
■
Maintenance
Cleaning (Electrode) (cont.)
Clean up electrode needle and around it.
Be sure there is no fiber or other materials of cleaner before use.
Replacing motor cartridge
Caution
REMEMBER
Take care of that too much tighten up of motor cartridge. That will cause
shorten lifetime of motor cartridge and failure. Especially in use of working
globe will reduce feeling of force back of screw up.
PROHIBITED
Contact your local supplier to repair G-9 in case of too much tighten motor
cartridge. Do not re-use motor cartridge in that case.
Motor cartridge is expandable. Periodic replacing will be needed.
Interval of replacing the cartridge depends on condition. Basic factors are
Factors
Affection
Circumstance temp. Higher temperature shorter lifetime.
Quality of air
Higher humidity shorter lifetime.
Interval
Longer continuous operating shorter lifetime.
Adjusting regulator
Closer to yellow LED longer lifetime.
Try to adjust regulator and confirm air pressure if no LED turns on even grabbing trigger.
Replace motor cartridge even LED still does not turn on with regulator position is at fully screw
down.
Cleaning up around needle
Clean up needle
