9
To install a Cradle
1. Remove the cover plate by
inserting a small screwdriver
into the tabs. Alternatively push
the cover from the rear.
2. Use the cradle as a template for
marking the mounting holes.
Note - A hole is required for the
H1P cradle power cable.
3. Mark the holes required and
drill them.
4. H1P cradle. Feed the power
cable into the power cable hole.
Use marine sealant to
waterproof holes if mounting
externally. Note - Side holes
allow optional surface mounting.
6. Snap the cover plate into place.
Power cable
Mounting
Power cable
5. Secure with fastenings of your
choice. Use marine sealant
to waterproof holes if mounting
externally.
Side hole
