10
H1 Bulkhead Connector
The Bulkhead Connector can be mounted almost
anywhere where a WiFi connection to the M1 hub can be
achieved.
Consider the following position and power connection
requirements when choosing a Bulkhead Connector
location:
- Position the Bulkhead Connector near the H1 cradle.
- The Bulkhead Connector is wired to power
(12V or 24V DC).
- The spiral tether cable of the H1 stretches to a
maximum length of approximately 2M (6ft).
HINT - The Bulkhead Connector base is supplied pre-
assembled and can be rotated in 90 degree increments
prior to fastening to achieve a convenient installation
angle once the H1 plug is inserted.
Arrows on the Mounting Base
indicate the correct vertical
orientation for most
installations.
CAUTION - Ensure that the minimum safe compass
distance is maintained. Standard: 0.8m, Steering: 0.4m.
Mounting
Base
Waterproof
Cap (IP67)
Cover
1. BASE, SOCKET & NUT ASSEMBLY
FRONT ON ANGLE AS CRADLE ABOVE
1. BASE, SOCKET & NUT ASSEMBLY
FRONT ON ANGLE AS CRADLE ABOVE
1. BASE, SOCKET & NUT ASSEMBLY
FRONT ON ANGLE AS CRADLE ABOVE
1. BASE, SOCKET & NUT ASSEMBLY
FRONT ON ANGLE AS CRADLE ABOVE
