7
Cradle & Bulkhead Connector wiring
A handset draws 12W (1A@12V) maximum.
The power cables of both the H1 Bulkhead Connector
and the H1P cradle may be extended or shortened as
necessary.
> Connect the positive (+ve red) and negative
(-ve black) leads of the power cable to the vessel.
> Connect a fuse or circuit breaker to the positive
lead of the appropriate rating for the circuit.
(ie 2A for each handset)
Cradle and Bulkhead Connector
wiring color codes
H1P Charging Cradle and H1 Bulkhead Connector
Wiring Diagram
Power +ve
FUSE
Red
Black
Negative -ve
1. BASE, SOCKET & NUT ASSEMBLY
FRONT ON ANGLE AS CRADLE ABOVE
Red
DC positive (+ve) (12/24 volts).
Black
DC negative (-ve)
Always use a fuse or circuit breaker installed
near the battery end or bus bar end.
Do not connect directly to a battery.
If you must extend the power connections use quality
tinned marine grade wire at least 16 AWG (1.5mm²).
