Removing the wheel axle bearings
- Remove the oil seal and the Seeger ring.
- Remove the bearing by pushing from the outside
towards the inside of the gear compartment, using
the appropriate punch.
Specific tooling
020363Y
20-mm guide
020376Y
Adaptor handle
020358Y
37x40-mm Adaptor
Removing the driven pulley shaft bearing
- Remove the Seeger ring inside the cover.
- Remove the oil seal from the outside.
- Remove the centring dowels and position the
cover on a plane.
- Position the special tool on the internal track of
the bearing and remove said bearing with the aid
of a press.
Specific tooling
020452Y
Tube for removing and refitting the
driven pulley shaft
- Position the special tube on the internal raceway
of the bearing and from the shaft toothed side as
indicated in the figure. Expel the driven pulley shaft
with the aid of a press.
Specific tooling
020452Y
Tube for removing and refitting the
driven pulley shaft
Engine
Vespa LX 50
ENG - 72
Summary of Contents for LX 50
