manualshive.com logo in svg

VESPA GTS Super 300, User Manual

Share
Download
VESPA GTS Super 300 User Manual Download Page 63

WARNING

IF THE SCOOTER IS USED ON DUSTY ROADS IT IS NECESSARY TO SERVICE
THE TRANSMISSION COVER FILTER SPONGE MORE FREQUENTLY.

CAUTION

DETERGENTS CAN POLLUTE WATER. THE VEHICLE MUST BE WASHED AT A
WASH STATION EQUIPPED WITH A SPECIAL WATER PURIFICATION SYSTEM.

WARNING

THE USE OF A HIGH-PRESSURE WATER JET IS STRONGLY DISCOURAGED
FOR ANY ENGINE CLEANING OPERATION; HOWEVER, IF NO OTHER MEANS
ARE AVAILABLE, IT IS THEN NECESSARY TO:

• ONLY USE FAN SPRAY JETS.

• DO NOT PLACE THE WATER JET NOZZLE CLOSER THAN 60 CM.

• DO NOT USE WATER AT TEMPERATURES OVER 40°C.

• DO NOT USE HIGH-PRESSURE WATER JETS.

• DO NOT STEAM WASH.

• DO NOT DIRECT THE JET STRAIGHT TO THE WIRING AND SLOT DIFFUSER
ON THE TRANSMISSION COVER.

WARNING

NEVER WASH THE SCOOTER IN DIRECT SUNLIGHT, ESPECIALLY DURING
SUMMER WHEN THE BODYWORK IS STILL HOT, AS THE SHAMPOO CAN DAM-
AGE THE PAINTWORK IF IT DRIES BEFORE BEING RINSED OFF. NEVER USE

63

3 Maintenance

Summary of Contents for GTS Super 300



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands