VESPA GTS Super 300 User Manual Download Page 49

Page: 49 / 82

03_16

03_17

Battery (03_16, 03_17)

To reach the battery «

», proceed as follows:

1. rest the scooter on its centre stand;

2. unscrew the 4 screws «

», remove the footrest «

».

3. remove the two battery fixing screws «

».

WARNING

IN ORDER TO AVOID DAMAGING THE ELECTRICAL SYSTEM, NEVER DISCON-
NECT THE WIRING WHILE THE ENGINE IS RUNNING.

CAUTION

UPON CONNECTING THE BATTERY TERMINALS, AVOID CONTACT WITH THE
METAL BODY

WARNING

DO NOT TRY TO REMOVE THE BATTERY SEAL. THE ELECTROLYTE IN THE
BATTERY CONTAINS SULPHURIC ACID : AVOID CONTACT WITH EYES, SKIN
AND CLOTHES. IN THE CASE OF ACCIDENTAL CONTACT, RINSE WITH ABUN-
DANT OF WATER AND CONSULT A DOCTOR.

WARNING

SPENT BATTERIES ARE HARMFUL FOR THE ENVIRONMENT. COLLECTION
AND DISPOSAL SHOULD BE CARRIED OUT IN COMPLIANCE WITH CURRENT
REGULATIONS.

Electric characteristic

Battery

3 Maintenance

Summary of Contents for GTS Super 300



















































































Search results

Summary of Contents for GTS Super 300

Reviews:

Brands by name

Popular brands

VESPA GTS Super 300, User Manual

Search results

Summary of Contents for GTS Super 300

Reviews:

Brands by name

Popular brands