VESPA GTS Super 300 User Manual Download Page 40

Page: 40 / 82

CAUTION

USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL CHANGE, CONTACT AN AUTHORISED PIAGGIO SERVICE CENTRE, AS
THEY ARE EQUIPPED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.

CAUTION

USING OILS OTHER THAN THOSE RECOMMENDED CAN SHORTEN THE LIFE
OF THE ENGINE.

Recommended products

AGIP CITY HI TEC 4T

Engine oil

SAE 5W-40, API SL, ACEA A3, JASO MA Synthetic oil

03_03

Hub oil level (03_03, 03_04)

Check the oil in the rear hub. To check the rear hub oil level, proceed as follows:

1) Park the scooter on level ground and rest it on its stand.

2) Unscrew dipstick «

», wipe it clean with a cloth, reinsert it and

tighten completely.

3) Pull out the dipstick and check that the oil level is above the first notch from the
bottom.

4) Reinsert the dipstick and ensure that it is tightened correctly.

3 Maintenance

Summary of Contents for GTS Super 300



















































































Search results

Summary of Contents for GTS Super 300

Reviews:

Brands by name

Popular brands

VESPA GTS Super 300, User Manual

Search results

Summary of Contents for GTS Super 300

Reviews:

Brands by name

Popular brands