manualshive.com logo in svg

VESPA GTS Super 300, User Manual

Share
Download
VESPA GTS Super 300 User Manual Download Page 42

CAUTION

FOR OIL REPLACEMENT, CONTACT ANY AUTHORISED SERVICE CENTRE AS
THEY ARE EQUIPPED TO DISPOSE OF USED OILS IN AN ENVIRONMENTALLY
FRIENDLY AND LEGAL WAY.

Recommended products

AGIP ROTRA 80W-90

Rear hub oil

SAE 80W/90 Oil that exceeds the requirements of API GL3 specifications

Characteristic

Rear hub oil

250 cc

03_05

Tyres (03_05)

Check the tyre pressure and wear periodically (roughly every 500 km). Tyres feature
wear indicators; replace tyres as soon as these indicators become visible on the tyre
tread. Also check that the tyres do not show signs of splitting at the side or irregular
tread wear; if this occurs, go to an authorised workshop or at least to a workshop
equipped to perform the replacement.

CAUTION

TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.

42

3 Maintenance

Summary of Contents for GTS Super 300



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands