- Check the axial clearance on the connecting rod.
Fitting clearance
Standard connecting rod axial clearance
0.15 ÷
0.30 mm
Max. connecting rod clearance
0.5 mm
- Check the correct radial clearance of the con-
necting rod by holding the driving shaft with your
hands and, with a dial gauge fitted to the rod small
end, measuring the clearance, move the connect-
ing rod vertically as shown in the figure.
Fitting clearance
Connecting rod radial - standard clearance
0.006 ÷ 0.018 mm
Connecting rod max. - radial
clearance
0.25 mm
- Check that the half shaft surfaces are not scored
and with the aid of a gauge check the driving shaft
width as indicated in the figure.
Characteristic
Standard measure
45 mm
Removing the crankshaft bearings
- Remove the flywheel bearing fitted on the driving
shaft using the specific tool.
Specific tooling
004499Y
Camshaft bearing extractor
004499Y001
Bearing extractor bell
004499Y002
Bearing extractor screw
004499Y006
Bearing extractor ring
004499Y034
Bearing extractor part
Vespa S 50 4T 4V (2008)
Engine
ENG - 103
Summary of Contents for 2008 S 50 4T 4V
