Vertiv VRC-S, User Manual

Page: 7 / 66

• The rack PDU has no user-serviceable parts, other than the field replaceable plastic carrier (not installed on all
models) that is designed to be field replaceable by qualified service personnel only. Under no circumstances
attempt to gain internal access due to the risk of electric shock or burn.
• Refer any unexpected behavior or unusual fault conditions to your local dealer or Vertiv representative.
• Vertiv recommends powering only devices with safety agency approval from the rack PDU.
• For permanently connected rack PDU’s (hard-wired versions), a readily accessible disconnect device must be
incorporated external to the equipment.
• For rack PDU’s with integral plugs, the socket/outlet or appliance coupler must be installed near the equipment
and must be easily accessible to disconnect for service.
To contact Vertiv technical support: visit Vertiv.com
For more information on this product, visit www.Vertiv.com to download the user manual.
Safety Precautions
WARNING! Observe all cautions and warnings. Failure to do so may result in serious injury or
death. Rack PDU units contain no user-serviceable parts, other than the field replaceable
plastic carrier (not installed on all models) that is designed to be field replaceable by qualified
service personnel only. For service or technical support, contact your local Vertiv
representative. Do not attempt to service this product yourself.
CAUTION: Connecting a rack PDU to a power supply with an incorrect rating in voltage or
amperes may damage the connected equipment and your rack PDU. For questions about the
power supply connections, contact your Vertiv representative.
CAUTION: Ensure that the ratings of the electric circuit of each connected device meet the
specified rating at each branch and receptacle.
NOTE: For power management purposes, record the receptacle where each piece of equipment is
connected. Receptacles on the rack PDU have a numeric designation. The rack PDU identifies the
receptacles with numbers and are grouped by branch with a letter referring to the proper circuit
breaker.
CAUTION: All configuration steps must be completed before attempting to start equipment
connected to the PDU.
1 Important Safety Instructions
3
Vertiv™| VRC-S User Manual