Vertiv VRC-S, User Manual

Page: 29 / 66

Figure 4.4 Backup Fan Power Cord Routing, Connection
Item Description
1 Backup fan power cord plugged into Geist rPDU
2 Backup fan
3 Backup fan symbol on GeistrPDU to indicate proper power connection
Table 4.1 Backup Fan Power Cord Routing, Connection Description
4.7 Connect Power to the Condensate Pump
The condensate pump requires connection to the correct, dedicated receptacle on the factory-installed Geist™ rPDU for
proper operation. The Geist rPDU is marked to facilitate proper connection.
To connect power to the condensate pump:
1. Connect the power cord to the condensate pump as shown in Figure 4.5 below .
2. Route the power cord over top of the transition piece to the Geist rPDU.
3. Locate the proper receptacle and plug the power cord into the Geist rPDU receptacle. The receptacle is
marked with a sticker to indicate where the condensate plug should go.
Figure 4.5 Condensate Pump Power Cord Routing, Connection
4 Installation
25
Vertiv™| VRC-S User Manual