Version Nr. 1-1 - 23.08.2017
Doc. Nr. 994020009
11 / 14
11. Taking into operation
Attention!
The unit can be damaged by lack of lubricant. To ensure that the compressor is adequately lubricated
the oil, which has been displaced during transport, must be allowed to flow back into it. The unit must
therefore be allowed to stand for at least 30 min. before being connected to the mains and taken into
operation. Upon connection the internal fan will start working. If the temperature inside the enclosure
is higher than the set value of the controller both the compressor and external air fan start working.
Once the air inside the enclosure reaches the set temperature the compressor and external fan will
stop.
The unit is pre-set at 35°C, which is suitable for most of the electronic devices.
