Chapter 3 Installation 41
NetSure 801 CA7 Power Supply System (New Skelecton) User Manual
（
a
）
（
b
）
（
c
）
（
d
）
Figure 3-22 Installing rectifier
Note
The rectifier is relatively big and heavy, please hold it carefully when mounting and dismounting it.
3.4.2 Installing Controller
The controller should be installed using the following procedures:
1. Unscrew the screws on the dummy plate, as shown in Figure 3-23.
假面板
螺钉
Screw
Dummy panel
Figure 3-23 Fixing the controller on the slideway
2. Unscrew the captive screw at the top of the hand of the controller, as shown in Figure 3-24.
Captive screw
Handle
Figure 3-24 Controller Panel diagram