Vertical Xcelerator IP
Xcelerator Owners Manual AccessLine 04-21-09
20
Once you have activated your service, you may start making and
receiving calls. This action also starts the billing for your phone
lines.
NOTE- This action only enables the billing for your phone lines.
Billing for installation fees, equipment and enhanced features such
as Automated Attendant or Webfax begin when you purchase the
service.
Setting up the Stand
Setting Up the Stand
Refer to the following steps and the associated illustration to setup
the stand of the Desk phone.
Step A Move the big U-type frame (4) downward.
Step B Move the big U-type frame (4) downward to the flat level.
The small U-type frame (5) will get flat concurrently.
Step C Move the U-type leg (3) upward.
Step D Seat the U-type leg (3) onto the big U-type frame (4) at
about a 30º-angle position.
-Or-
Step E Pull-in the U-type leg (3) and seat it at about a 45º-angle
position in the big U-type frame (4).
-Or-
Step F Pull-in the U-type leg (3) and seat it at about 60º-angle
position in the big U-type frame (4).