Connection Menu
3-5
Chapter 3: Speed Editor
SBX IP - PC Admin Guide
CONDITIONS:
•
The SBX IP system and PC must have valid IP addresses.
•
If you want to connect directly, you have to use cross UTP cable. That means that the
[Transmit] and [Receive] are cross. But you connect the the SBX IP system and PC with a
HUB, you can use normal UTP cable that is used in your local network.
•
If you want to connect from a different segment of the LAN or from an external site (via
Internet), the SBX IP system must have the correct gateway address (default router). If it
doesn't have the gateway address, remote connection using TCP/IP will be not available.
•
If you want to connect the the SBX IP system that is used in remote site, you may need
help from the network administrator. Because many site uses the firewall/NAT/PAT in their
router, to connect the system through the Internet, help will be needed.
•
In a remote connection using the Internet, connection speed/stability is dependent on the
environment of the WAN traffic or routing.
LAN Connection Setup
1.
Type the IP Address of the SBX IP system, then click [OK].
2.
You can choose the site address using the combo box. The combo box has the IP
address list of sites that you have visited.
3.
If you want to connect to a site that has never been visited, you must type the IP
address into the combo box. In this case, you can't edit the port number.
Release 3.5
June 2010