Vertical SBX IP, Admin Manual

Page: 105 / 338

System Timers I - III (PGM 180, 181,182) 1-91
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
System Timers - I (PGM 180)
ITEM RANGE DEFAULT REMARK
Attendant Recall Timer 00-60
(2 digits)
01
(min)
Establishes the amount of time before the system
disconnects the call.
Call Park Recall Timer 000-600
(3 digits)
120
(sec)
Establishes the amount of time before a call placed in a
call park location will recall the station placing the park.
Camp-on Recall Timer 000-200
(3 digits)
030
(sec)
If a station transfers to a busy station and hangs up, this
recall timer is invoked.
Exclusive Hold Recall
Timer 000-300
(3 digits)
060
(sec)
Establishes the amount of time before a call placed on
exclusive hold will recall the station placing the hold.
I-Hold Recall Timer 000-300
(3 digits)
030
(sec)
Establishes the amount of time before a call recalls the
attendant.
System Hold Recall Timer 000-300
(3 digits)
030
(sec)
Establishes the amount of time before a call placed on
system hold will recall the station placing the hold.
Transfer Recall Timer 000-300
(3 digits)
030
(sec)
Establishes the amount of time a transferred call will ring
at the station receiving the transfer and how long it will
recall the station transferring the call.
ACNR Delay Timer 000-300
(3 digits)
030
(sec)
When the ACNR Pause Timer expires and there is no
available CO Line in the group, this timer is invoked.
When the ACNR Delay Timer expires, invoke the ACNR
Pause Timer if there is still no available CO line, ACNR is
activated.
ACNR No Answer Timer 10-50
(2 digits)
030
(sec)
This Timer is invoked after system detects CO ring back
tone or voice from a CO party. After this timer, the system
retries ACNR.
ACNR Pause Timer 005-300
(3 digits)
030
(sec)
When this timer expires, ACNR is activated.
(For CIS: 5-300)
ACNR Retry Counter 01-30 03 This counter decreases every time the station retries
ACNR. ACNR is canceled if set to 0.
(For CIS: 1-9)
ACNR Retry No Tone 1-9
(1 digit)
1
(5 sec)
1 represents 5 seconds, the system will wait this value to
decide NO TONE.
3 represents 15 seconds. (Only for CIS)
Release 3.5 June 2010