Vertical SBX IP Admin Manual Download Page 23 | Manualshive

Page: 23 / 338

Vertical SBX IP Admin Manual Download Page 23

Level Management - Administrator Only

1-9

Chapter 1: SBX IP Online PC Admin

SBX IP - PC Admin Guide

2.

Press [New] button to assign a new level.

3.

Enter the level that you want to add.

Duplicated levels are not allowed. After entering a level, you can select the features that
you want to disable with the assigned level. If you disable a feature, the user who has this
level cannot see the menu in the menu list.

It is possible to select the menu by medium category (For example, PGM108, 111, 141,
etc.). You cannot assign a main category such as "Preprogrammed" or "Station Base
programming".

4.

After configuration, press the [SAVE] button to save changes.
Use [All clear] to clear the entire level of data.
Use [Delete] to delete one feature.

Tip for backup level database

There are two cases where you may need to restore the database or setup multiple customers
to the same level database.

Case 1: When you want restore the database after installing the PC Admin again.

Case 2: When you want to setup the same level data to various customers. In other words,
you can fix several levels and apply this configuration to all customers. Refer to below
instruction.

Backup and restoring the level database requires the use of two files - Lmaster.cds and
Ldetail.cds, which are in the installation directory.

If you backup these two files, it will be very helpful for emergency use.

1.

Install the PC Admin software in your PC and configure the level/menu with a desired
level.

2.

Backup the Lmaster.cds and Ldetail.cds files (Default: C:\Program files\LG
Electronics\ipLDK PCADM\Data) to your mobile storage device (e.g., floppy diskette,
USB memory, CD-ROM, etc.).

3.

Go to another site and install the PC Admin package.

4.

After installation, copy your preprogrammed DB file from your mobile storage device
(Lmaster.cds and Ldetail.cds) to the installation directory (Default: C:\Program files\LG
Electronics\ipLDK PCADM\Data).

These two files will be overwritten and you can use the PC Admin with the fixed level
information that you have programmed.

Release 3.5

June 2010

«
...
21
22
23
24
25
...
»

Summary of Contents for SBX IP



















































































































































































































































































































































Reviews:

No comments