Vertical comdial DX-120 Installation And Maintenance Manual Download

Page: 14 / 146

SING

HIS

ANUAL

DX-120 Installation and Maintenance Manual

- 8 -

Locating Documentation

Vertical technical publications are numbered according to their intended function. Various publications pertaining
to the products offered by Vertical can be found at http://vertical.co m/ccc. If you are unfamiliar with the CCC,
please contact Technical Support for details about logging in.

Document Prefix

Document Type

Purpose

Attendant Guide

Contains information required for pro-
gramming and using a system attendant.

FLDII

Field Installation Instructions

Contains basic information as a quick ref-
erence for programming in the field (vs.
remote programming)

GCA

General and Descriptive Information

(generally refers to Vertical documents
created or edited prior to 11/06)

Provides general information for the oper-
ation of features or hardware. This may
include programming manuals as well as
user guides.

IMI

Installation and Maintenance
Instructions

Provides instructions for Installing and
Maintaining various Vertical (Comdial)
products.

PRG

PRGM

Programming Instructions

Provides programming information

required for a particular product.

PRN

Product Release Notice

Contains information about any new prod-
uct that may have recently been released

Quick Reference

Provides concise, abbreviated installa-
tion, programming, or operating informa-
tion in a one or two page document.

SAB

Service Advisory Bulletin

Provides information to alert the field
about specific service related issues.

SRN

Software Release Notice

Provide information about a new software
release. These notices may be for new
feature releases or maintenance.

SUPG

Supervisor’s Guide

Provides information specific to supervi-
sor’s on particular systems that allow a
supervisor to use and program a variety of
additional features.

TAB

Technical Advisory Bulletin

Publications that are intended to offer spe-
cific technical information related to a par-
ticular product.

User Guide

Provides information specific to end-users
(e.g., those who use a phone at their desk
vs. someone who installs and/or programs
the system).

Summary of Contents for comdial DX-120


















































































































































Search results

Summary of Contents for comdial DX-120

Reviews:

Related manuals for comdial DX-120

Brands by name

Popular brands

Vertical comdial DX-120, Installation And Maintenance Manual

Search results

Summary of Contents for comdial DX-120

Reviews:

Related manuals for comdial DX-120

Brands by name

Popular brands