8 CUCINA 36P VERONA 07-2011 BOOKLET for HenryRev. o4
Setting:
Select a function by pressing the function button and set the required time
with
and
–
buttons.
+/- Buttons:
Pressing the
button increases the time set, pressing
–
decreases it.
The count-up or count-down speed increases the longer the button is held in
the appropriate position.
Setting Time of Day:
Select Time of day function by keeping and buttons pressed together
while setting time of day with
and
–
buttons. Any program which has
been set is cancelled and the outputs switched on.
Manual Operation: FOR NON-PROGRAMMABLE OPERATION, THE UNIT
MUST BE IN MANUAL MODE.
Press and buttons together. The relay contacts will switch on. The “
A
”
symbol will be erased, the cookpot symbol will come on. Any program
which has been set is cancelled.
Semi-Automatic Operation with cooking duration:
Select function and set required end time with the
and
–
button. The
“
A
” and cookpot symbols appear. The relay output becomes active. If
time of day = cooking end time the relay output and the cookpot symbol are
switched off.
The audible signal sounds and “
A
” blinks.
Fully Automatic Operation:
Select function and set required duration with the
and
–
button.
The “
A
” symbol appears. The relay is switched on and the cookpot symbol
appears. Then select function and the earliest possible end time is
displayed. Set the required end time with the
and
–
button. The relay
and the cookpot symbol are switched off. The cookpot symbol appears again
when time of day = the calculated start time. At this point you can put the food
in the cooking chamber, set desired oven function and cooking temperature.
After the automatic programme has ended, the symbol “
A
” blinks. The audible
signal is heard and the cookpot symbol and the relay are switched off.
