manualshive.com logo in svg

Vernacare COMPACT+, Technical Manual

The Vernacare COMPACT+ is an innovative healthcare waste disposal system designed to enhance infection control protocols. To ensure optimal usage, it is essential to refer to the comprehensive Technical Manual. Download this manual for free from our website manualshive.com and effortlessly access all the necessary instructions and guidelines.

Share
Download
background image

   
 

 

 

Vernacare Compact Plus Technical Manual-

Revision 2-Issued by N.Shields 14.2.2020 

Page | 2 

 

 

Contents 

 

Declaration of Conformity

 ............................................................................................................... 5 

1.

 

Warranty Information

 ................................................................................................................ 6 

1.1.

 

Warranty terms

 ................................................................................................................... 6 

1.2.

 

Conditions of warranty

 ..................................................................................................... 6 

1.3.

 

Service Contracts

 ............................................................................................................... 6 

2.

 

Specifications

 ............................................................................................................................. 7 

2.1.

 

Capacities and usage

 ........................................................................................................ 7 

2.2.

 

Handling

 ............................................................................................................................... 7 

2.3.

 

Electrical specification

 ..................................................................................................... 7 

2.4.

 

Motor

 ..................................................................................................................................... 8 

2.5.   Inverter

 .................................................................................................................................... 8 

2.6.

 

Pump

 ..................................................................................................................................... 8 

2.7.   Water requirements

 ............................................................................................................. 8 

2.8.

 

Drainage

 ............................................................................................................................... 8 

3.

 

General Description

 ................................................................................................................... 9 

3.1.

 

General description

 ........................................................................................................... 9 

3.2.

 

Safety related control functions

 ..................................................................................... 9 

3.3.

 

Compact Plus Normal Cycle Sequence

 ..................................................................... 10 

3.4.

 

General Assembly

 ............................................................................................................ 11 

3.5.

 

Dimensions of the Vernacare Compact Plus

 ............................................................ 12 

4.

 

Installation / Commissioning

 ................................................................................................ 13 

4.1.

 

Required Install Clearences and Heights

 .................................................................. 13 

4.2.

 

Using the Wall Bracket Assembly

 ............................................................................... 14 

4.3.

 

Siting and fixing

 ............................................................................................................... 15 

4.4.

 

Plumbing

 ............................................................................................................................ 16 

4.4.1.

 

Water supply

 ................................................................................................................. 16 

4.4.2.

 

Drain connection

 .......................................................................................................... 16 

4.5.

 

Electrical

 ............................................................................................................................. 17 

4.5.1.

 

Single-phase electrical system (230v, 1 Ph, 50 HZ) (110v, 1 ph, 60 HZ)

 .... 17 

4.5.2. 

 

Back-up generator tests / mains electrical supply surges.

 .......................... 17 

4.6.

 

Environment

 ...................................................................................................................... 17 

4.7.

 

Commissioning

 ................................................................................................................. 18 

Summary of Contents for COMPACT+











































Reviews:

No comments

Related manuals for COMPACT+

Franke RODX604 Installation And Operating Instructions preview
RODX604
Brand: Franke Pages: 5
Powerhorse 52313 Owner'S Manual preview
52313
Brand: Powerhorse Pages: 22
Jobsite CT0567 Instruction Manual preview
CT0567
Brand: Jobsite Pages: 24

Brands by name

Popular brands

Load more brands