33
Chateau™ Direct Vent Gas Fireplace
20011957
������
����������
����
Trim Installation
CAUTION: Allow fireplace to cool if it has been
in operation.
Trim components: 2 each, top frame assembly,
bottom trim assembly, right and left trim assem-
blies.
NOTE:
Only one trim set is used when Vista Door
is installed.
NOTE:
Place trim pieces with magnets facing
window frame.
1. Place bottom trim on the bottom of the window
frame.
NOTE:
Final adjustments will be made
once all trim pieces are in place.
2. The right and left trim piece have a 45° notch
on the back corner of the top end. (Fig. 52)
Place the right trim against the right side of the
window frame, making sure the bottom is over-
lapping the bottom trim piece. The right side
of the trim should butt up against the right side
nailing flange of the fireplace.
3. Place the left trim on the left side of the window
frame as in Step 2.
4. Place the top trim piece so the ends overlap
both the right and left side trim pieces.
5. Adjust the top trim so the top butts up against
the top nailing flange and the sides are butted
up against the side nailing flanges and the top
trim. Once the top trims are in place, move the
bottom trim up until it fits securely with the bottom of
the side trims.
6. Repeat steps for other side of fireplace.
Left and Right Trim,
45° Notch on Top End
KT601
Fig. 52
The right and left trim pieces have a 45° notch on the
back corner of the top end when properly installed.
Nailing
Flange
Trim
FP1814
Fig. 53
Trim frame in place.
