D20x22 Series II Navigator HDD
Overview 30-31
Reamer - Connect with Threaded Connection
Step 1:
Ensure drilling machine has been locked out.
Step 2:
Ensure components are clean.
Step 3:
Lubricate threaded end of reamer.
Step 4:
Align reamer with drill string and manually turn reamer by hand until reamer is completely threaded
onto drill string.
Step 5:
Remove reamer carrier.
Step 6:
Use Portable Breakout system to tighten connection. Refer to “PBD7500 Portable Breakout Device,”
Refer to the following chart for makeup torque.
NOTICE:
If using an API crossover connector
(1)
,
it is important to be aware that correct
makeup torque of the crossover sub to the reamer is crucial. Failure to torque API joints to
the following minimum specifications can result in joint separation or other failures of
tooling. Correctly torquing the joints will require the use of a Portable Breakout system.
API Connection Size
Minimum Makeup Torque
Suggested Maximum
Operating Torque
2-3/8˝ API Regular
1,560 ft-lb (2115 Nm)
2,600 ft-lb (3526 Nm)
2-7/8˝ API Regular
3,000 ft-lb (4068 Nm)
5,000 ft-lb (6780 Nm)
3-1/2˝ API Regular
7,200 ft-lb (9763 Nm)
12,000 ft-lb (16272 Nm)
1
