30-34 Overview
D20x22 Series II Navigator HDD
R
OD
B
OX
Rod Box - Load
Step 1:
Remove two top rod box pins
(1)
from
top of rod box.
Step 2:
Unlatch and swing up bar
(2)
in
middle of box.
Step 3:
Load rods into rod box.
Step 4:
Replace top pins and bar.
Rod Box - Install
Step 1:
Connect hoist chain to all four lift eyes
(3)
.
NOTICE:
Lift rod box by top lift eyes only.
Step 2:
Carefully lower rod box between guide plates.
Install rod box with male threads to front.
Step 3:
Install two lower rod box support bars
(4)
and retainer pins
(5)
.
Step 4:
Remove hoist chain.
Step 5:
Raise rod box cylinders to push rods into box.
Step 6:
Shut off engine.
Step 7:
Remove two lower rod box support bars
(4)
and retainer pins
(5)
and place
in storage position
(6)
before drilling.
1
4
2
3
5
6
5
4
