background image

32

User guide

Compatible accessories

PS12V2000

T49G Power Supply

CORD

Replacement Handset Cord

T49GHS

T49G Replacement Handset

Visit the Verizon Wireless website for a list of compatible 

headsets from popular manufacturers.

Important customer information

To avoid electric shock, use caution when connecting cables. 

For example, do not connect safety extra-low voltage (SELV) 

circuits to telephone-network voltage (TNV) circuits. LAN ports 

contain SELV circuits, and WAN ports contain TNV circuits. 

Some LAN and WAN ports both use RJ-45 connectors.
To avoid electric shock, do not operate the product or connect 

or disconnect cables during electrical storms. To avoid electric 

shock, do not use this product in or near water.
To reduce the risk of fire or overheating, keep this product in 

well-ventilated areas, away from radiators or other heat 

sources. Do not block cooling vents.
The plug-socket combination must be accessible at all times 

because it serves as the main power-disconnecting device.
Use only the manufacturer-provided AC adaptor approved for 

use with this product. Use of another AC adaptor may cause a 

fire or explosion.
This product relies on short-circuit (overcurrent) protection 

installed in your home or office. Ensure that a fuse or circuit 

breaker no larger than 120 VAC, 15A U.S. is used on the phase 

conductors (all current-carrying conductors).
Unplug this product from the wall outlet and refer servicing to 

qualified service personnel under the following conditions:
1.  When the power cord or plug is damaged or frayed
2.  If liquid has been spilled into the product
3.  If the product has been exposed to rain or water
4.  If the product does not operate normally when the 

operating instructions are followed. Adjust only those 

controls that are covered by the operating instructions, 

since improper adjustment of other controls may result in 

damage and will often require extensive work by a qualified 

technician to restore the product to normal condition

  

WEEE warning

To avoid the potential effects on the environment and human 

health as a result of the presence of hazardous substances in 

electrical and electronic equipment, end users of electrical and 

electronic equipment should understand the meaning of the 

crossed-out wheeled bin symbol. Do not dispose of WEEE as 

unsorted municipal waste and collect such WEEE separately.

Customer feedback

We are striving to improve our documentation quality, and we 

appreciate your feedback. Email your opinions and comments 

to 

[email protected]

.

GNU GPL information

Yealink SIP VP-T49G IP phone firmware contains third-party 

software under the GNU General Public License (GPL). Yealink 

uses software under the specific terms of the GPL. Please refer 

to the GPL for the exact terms and conditions of the license.
The original GPL and the source code of components licensed 

under GPL and used in Yealink products can be downloaded 

online: http://www.yealink.com/GPLOpenSource.
Copyright © 2019 Yealink Network Technology CO., LTD. All 

rights reserved. No parts of this publication may be reproduced 

or transmitted in any form or by any means, electronic or 

mechanical, photocopying, recording, or otherwise, for any 

purpose, without the express written permission of Yealink 

Network Technology CO., LTD. Under the law, reproducing 

includes translating into another language or format.
When this publication is made available on media, Yealink 

Network Technology CO., LTD. gives its consent to 

downloading and printing copies of the content provided in this 

file only for private use but not for redistribution. No parts of 

this publication may be subject to alteration, modification or 

commercial use. Yealink Network Technology CO., LTD. will  

not be liable for any damages arising from use of an illegally 

modified or altered publication.

Summary of Contents for One Talk T49G





































Reviews: