VERITAS NetBackupTM 5.0, User Manual And Product Specifications

Page: 110 / 428

Managing Your Device Configuration
76 NetBackup Media Manager System Administrator’s Guide for Windows
If there is a device selected in the Devices pane, SANPoint Control will be launched
with the device as context. If there is no device selected, then SANPoint Control will
be launched with the host as the context.
2. Select Actions > View SANPoint Control.
3.
The SANPoint Control browser is launched. See your SANPoint Control
documentation for information on usage.
If SANPoint Control is not installed, a message appears explaining how to enable it.
▼
To access SANPoint Control reports
The SANPoint Control reports allow you to check for intermittent failures of drives, and
to see what types of SAN errors may be happening to help you diagnose problems.
1. In the NetBackup Administration Console, click NetBackup Management > Reports.
2.
Select Actions > View SANPoint Control Reports.
This will launch a browser with the main reports screen. See your SANPoint Control
documentation for more information.
Printing Your Device Configuration
▼
To print your current device configuration
1.
In the Devices pane, click on Drives, Robots, or Hosts.
2. Select File > Print.
▼
To print the device configuration topology diagram
1.
Click in the Topology pane.
2. Select File > Print.
▼
To print your current device configuration using tpconfig
The
tpconfig
command is located in install_path
\Volmgr\bin\
.
The following example uses
tpconfig
to list the device configuration and redirect the
output to the file named
devconf.txt
, which can then be printed:
tpconfig -dl > devconf.txt