VERITAS NetBackupTM 5.0 User Manual And Product Specifications Download Page 107

Page: 107 / 428

Chapter 2, Configuring Storage Devices

Managing Your Device Configuration

A dialog appears that contains Drive Information and Results sections. This dialog
allows you to execute and manage the drive diagnostics tests.

Select the media server that has the drives that you want to test in the Device Host
box.

For the drive that you want to test, do the following:

Manually set the drive state to DOWN.

Manually insert a pre-labeled test tape with a NetBackup recorded label into the
drive.

In the Drive Name box, select the drive.

Information for the drive you selected is displayed in the Drive Information section.

Click Start to start the diagnostic tests.

The results of each step in the test are shown in the Results display. Click Refresh to
update the Results display

Summary of Contents for NetBackupTM 5.0













































































































































































































































































































































































































































Search results

Summary of Contents for NetBackupTM 5.0

Reviews:

Related manuals for NetBackupTM 5.0

Brands by name

Popular brands

VERITAS NetBackupTM 5.0, User Manual And Product Specifications

Search results

Summary of Contents for NetBackupTM 5.0

Reviews:

Related manuals for NetBackupTM 5.0

Brands by name

Popular brands