4
859.0089
ATEX Certifications
ATEX T-code rating is dependent on the temperature of the fluid being pumped. Fluid temperature is limited by the
materials of the pump interior wetted parts. See Technical Data on page 31 for the maximum fluid operating tem-
perature for your specific pump model.
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. When
these symbols appear in the body of this manual, refer back to these Warnings. Additional, product-specific warnings
may be found throughout the body of this manual where applicable.
All
VA25(HE)AA, VA25(HE)CC, VA25(HE)HC,
VA25(HE)SA,
and
VA25(HE)SC
pumps are certified:
II 2 GD
Ex h IIC 66°C...135°C Gb
Ex h IIIC T135°C Db
II 1 G
Stroke Sensor is certified:
Ex ia IIA T3
ITS13ATEX27862
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
•
Use equipment only in well ventilated area.
•
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
•
Keep work area free of debris, including solvent, rags and gasoline.
•
Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes
are present.
•
Ground all equipment in the work area. See Grounding instructions.
•
Use only grounded hoses.
•
Hold gun firmly to side of grounded pail when triggering into pail.
•
If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
•
Keep a working fire extinguisher in the work area.
Static charge may build up on plastic parts during cleaning and could discharge and ignite flammable
materials and gases. To help prevent fire and explosion:
•
Clean plastic parts in a well ventilated area.
•
Do not clean with a dry cloth.
•
Do not operate electrostatic guns in equipment work area.
Summary of Contents for VERDERAIR VA 25
Page 33: ...859 0089 33 Notes ...
