VERDER VERDERAIR VA 25 Repair Parts Download

Page: 31 / 35

859.0089

Technical Data

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 psi (0.86 MPa, 8.6 bar)

Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-125 psi (0.14-0.86 MPa, 1.4-8.6 bar)

Fluid displacement per cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)

Air consumption at 70 psi (0.48 MPa, 4.8 bar), 20 gpm (76 lpm) . . . . . . . . . . . . . . . 25 scfm

Maximum values with water as media under submerged inlet conditions at ambient temperature:

Maximum air consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 scfm

Maximum free-flow delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 gpm (189 lpm)

Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 cpm

Maximum suction lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ft (4.9 m) dry, 29 ft (8.8 m) wet

Flooded volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.375 gal. (1.42 liters)

Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)

Recommended cycle rate for continuous use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 - 140 cpm

Recommended cycle rate for circulation systems. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 cpm

Sound Power*

at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 dBa

at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 dBa

Sound Pressure**

at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 dBa

at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 dBa

Operating temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see page 32

Air inlet size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)

Fluid inlet size

Aluminum (

VA25(HE)AA

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt

Plastic (

VA25(HE)PP

VA25(HE)CC,

and

VA25(HE)KP

) . . . . . . . . . . . . . . . . . 1 in. raised face ANSI/DIN flange

Hastelloy (

VA25(HE)HC

) and Stainless Steel (

VA25(HE)SA, VA25(HE)SC,

and

VA25(HE)SP

). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 in. npt(f) or 1 in. bspt

Fluid outlet size

Aluminum (

VA25(HE)AA

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f) or 1 in. bspt

Plastic (

VA25(HE)PP

VA25(HE)CC,

and

VA25(HE)KP

) . . . . . . . . . . . . . . . . . . . . . 1 in. raised face ANSI/DIN flange

Hastelloy (

VA25(HE)HC

) and Stainless Steel (

VA25(HE)SA, VA25(HE)SC,

and

VA25(HE)SP

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 in. npt(f) or 1 in. bspt

Weight

Aluminum (

VA25(HE)AA

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 lb. (10.5 kg)

Hastelloy (

VA25(HE)HC

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 lb. (18.6 kg)

Polypropylene and Conductive Polypropylene (

VA25(HE)PP

and

VA25(HE)CC

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18 lb. (8.2 kg)

PVDF(

VA25(HE)KP

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 lb (11.8 kg)

Stainless Steel

with conductive polypropylene center (

VA25(HE)SC

) . . . . . . . . . . . . . . . . . . 36.3 lb. (16.5 kg)

with polypropylene center (

VA25(HE)SP

) . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 lb. (16.9 kg)

with aluminum center (

VA25(HE)SA

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.4 lb. (18.8 kg)

Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction

VA25(HE)AA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aluminum

VA25(HE)HC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hastelloy

VA25(HE)PP

and

VA25(HE)CC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene

VA25(HE)KP

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PVDF

VA25(HE)SA, VA25(HE)SC,

and

VA25(HE)SP

. . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steel

Summary of Contents for VERDERAIR VA 25




































Search results

Summary of Contents for VERDERAIR VA 25

Reviews:

Related manuals for VERDERAIR VA 25

Brands by name

Popular brands

VERDER VERDERAIR VA 25, Repair Parts

Search results

Summary of Contents for VERDERAIR VA 25

Reviews:

Related manuals for VERDERAIR VA 25

Brands by name

Popular brands