5.0
Simple Temperature Control
The 3016 can be used as a programmer or as a simple temperature controller.
The controller has been configured so that it cannot heat above the maximum stated
temperature for the product you have purchased.
To set a setpoint temperature:
1. Press the Up and Down buttons to increase or decrease the setpoint value. Holding
a button down will adjust the value at a faster rate.
2. Once the buttons are released the 3016 will begin to control the temperature
according to the new setpoint.
Changing the Setpoint
Note:
The output indicator 1 icon will appear to show that power is being directed to
the product heating elements.
5.1
Sensorbreak
If a thermocouple becomes disconnected or fails, the controller display will flash
between the error messages
S.brk
and
bAd
, indicating that the thermocouple is unable
to read a temperature.
The controller will automatically switch to display a "high point" value i.e. the maximum
temperature the product is configured to achieve, and further heating will be
prevented.
Note:
If any alarm relay outputs are configured, then the icons for these will also
appear on-screen
11
