Verdemax PT20, Operating Manual

Page: 21 / 36

21
EN
Battery-powered pruner PT20
Technical data
Battery voltage/operation voltage 20 V DC
Guide bar 200 mm / 8“
Chain 91P0433X
Guide bar type 0803DEA318 Oregon
Speed 5 m/s
Angle at which the motor can be set from 0° to 30°
Lunghezza dell‘apparecchio from 2 m to 2,55 m
Weight 3,76 kg
Oil 90 cm
3
Sound Pressure Level (2000/14/EG) 74,4 dB(A) [K 3,0 dB(A)]
Measured sound power level L
WA
86 dB(A) [K 3,0 dB(A)]
Vibration
< 2,5 m/s
2
[K 1,5 m/s
2 ]
Technical changes are reserved.
Emissions
- The specified vibration emission value was measured by a standardized test methods and can
compare with other power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks
are used.
- The specified vibration emission value can vary during the actual use of the electric tool by
specifying the value, depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks
- Try to keep the stress due to vibration as low as possible. For example, measures to reduce
vibration stress are wearing gloves when using the tool and limiting the work time. All phase of
the operating cycle must be considered in this regard, (for example, times when the power tool
is switched off, and times when the power tool is switched on but is not running under load).
Original instructions