Prepa ration s & Preca ut ions
I-Ga te 4000 P R O Ins tall ation
2-6
Veraz Networks Inc. Proprietary
02041802-05
2.6. Tool List
Tools normally available at the telephone exchange such as a wrench, pliers,
screwdrivers and wire cutters can be used to install the I-Gate 4000 PRO. In addition
to the above, the following are needed:
!
Stepladder for cable routing/
connection over top wiring ducts
and top cabinet fastening
!
Pin crimper for grounding wires
!
Yardstick or tape measure
!
Wire wrap/unwrap tool
!
8 mm and 10 mm drill bits for wood
and concrete
!
Lifting device to move the pallet-
mounted containers
!
Air pressure spray
!
10 mm drill bit for drilling holes
into the wall
!
Medium size (300 g) hammer for
screw anchors
!
Hammer drill
!
13 mm socket wrench
!
Tool for making Type 43 or
RJ 45 and wire wrap connectors
!
Carpenter's level
!
5 mm Allen key
!
¾" open spanner or adjustable
wrench
!
Craft knife
!
Flat-blade screwdriver with 1/8"
(3.3mm) blade
!
Adjustable wrench
!
Phillips head screwdriver
!
Metal toothed saw
!
Crescent wrench
!
Metal file
!
Pin crimper for D-type 37-pin
connectors
!
Jigsaw
