Verathon BFlex Operation & Maintenance Manual Download | Manualshive

Page: 49 / 64

background image

43

Operations & Maintenance Manual: Warranty

0900‑4868 REV‑08

WHAT IS COVERED?

Warranty coverage applies to the following system components:

• GlideScope Video Monitor
• GlideScope Video Monitor QuickConnect Cable

Additional reusable components purchased either singularly or as a part of a system are warranted separately.
Consumable items are not covered under this warranty.

PREMIUM CUSTOMER CARE WARRANTY

You may purchase a Premium Total Customer Care warranty that extends the limited warranty. For more
information, contact Verathon Customer Care or your local representative.

DISCLAIMER OF ADDITIONAL WARRANTIES

There are no understandings, agreements, representations of warranties expressed or implied (including
warranties of merchantability or fitness for a particular purpose) other than those set forth in this chapter and
the

Terms and Conditions of Sale

. The contents of this manual do not constitute a warranty.

Some states disallow certain limitations on applied warranties. The purchaser should consult state law if there
is a question regarding this disclaimer. The information, descriptions, recommendations, and safety notations
in this manual are based upon Verathon experience and judgment. The contents of this manual should not
be considered to be all‑inclusive or to cover all contingencies.

«
...
47
48
49
50
51
...
»

Summary of Contents for BFlex

































































Reviews:

No comments

Related manuals for BFlex

Brand: Bahco Pages: 9

Brand: Datex-Ohmeda Pages: 80

Brand: MacDon Pages: 2

Brand: V-TAC Pages: 6

Lab companion SI-300

Brand: Jeio tech Pages: 69

IP Video Test Option HST-3000

Brand: JDS Uniphase Pages: 4

Brand: Jct Pages: 16

Brand: Nektar Pages: 12

Brand: PAS Systems International Pages: 24

MARK V Alcovisor

Brand: PAS Systems International Pages: 20

Brand: PARRY Pages: 14

Brand: York Fitness Pages: 36

Brand: Teac Pages: 44

Brand: Te Pari Pages: 6

Brand: VADDIO Pages: 58

Brand: Yamaha Pages: 4

Brand: Wacker Neuson Pages: 120

Brand: TANNER Scientific Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands