1.0 Introduction
Ver-Mac - May 2011
1210 QuickStep Programming User Manual, Ver 5.0
1
1.0 Introduction
The Portable Changeable Message Sign (PCMS) 1210 QS with handheld controller
is a three line, eight character message signboard with simple QuickStep
programming. The unit consists of a message board of amber-colored LEDs,
handheld controller, solar panel(s) and a battery bank, all mounted on a heavy-
duty towable trailer.
The outstanding features of the PCMS-1210 QS are its rugged reliability, low
maintenance and user-friendly operation.
This manual contains information concerning the programming of a PCMS
QuickStep using the Ver-Mac handheld controller.
1.1 Options
Several options are available to augment the programming and
communication capabilities of the basic PCMS unit and to guarantee the
power supply for the system.
•
3G modem for rapid remote communication
•
Access to JamLogic2, Ver-Mac’s remote fleet management software
•
Radar
•
Data logger (requires radar)
•
GPS tracking (requires modem)
•
Built-in battery charger (AC)
•
Automatic charging control with IQ4 Smart Controller
To know if your PCMS unit has any of these options and what the options
are, consult your Ver-Mac invoice for the initial purchase.
2 - Unit Installation
Always exercise the greatest care and caution with regard to all aspects of the
transportation, setup and take down of your PCMS unit.
Full details concerning transportation, roadside setup and take down procedures
can be found in the
PCMS Safety and Maintenance Manual
.
