5.0 Operations
22
1210 QuickStep Programming User Manual, Ver 5.0
Ver-Mac - May 2011
5.
To change default page timings press
[F1] TIME
Figure 21 – Page Flash Time
To alter page timings, overwrite Display time or press
[
] Enter
to move cursor
•
Set the page display time in seconds. Default display time is
2.0 seconds
•
Set the line flash time
Press
[
]
OK
to save and then
[ESC]
to return to Sequence page
#1
6.
Use the
[
]
arrow key to move to sequence page 2
•
Repeat Steps 3 – 6 for any additional pages
7.
When all is complete press
[ESC]
until you return to Sequence
page #1 screen. Press
[ESC]
one more time to update and run
the altered sequence
Figure 22 – Indicating Sequence is Being Updated
