5.0 Operations
Ver-Mac - May 2011
1210 QuickStep Programming User Manual, Ver 5.0
17
5.4.2 Creating a New Text Message
[
] Enter > Main Menu > [F3] Message
Figure 16 – New Message Main Screen
1.
Select a blank message:
•
overwrite the last two digits of the MSG number
or
•
use the arrows
[
]
to scroll through existing messages to find a
blank message and press
[
] Enter
2.
The blinking cursor appears at the beginning of line 1 in the message
area. Create text message using
•
keypad to write message text
•
arrow keys
[
]
to position the cursor
3.
Set line flashing (F=)
•
move cursor to required line
•
press
[F1]
to toggle
Y
es/
N
o
4.
Press
[
] Enter
to save message and return to the Message screen
or
Press
[ESC]
to discard changes and return to the Message screen
Note:
To correct text content you can do one of the following:
•
type over the existing text
•
press
[
BS] Backspace
to erase previous characters and rewrite
•
press
[DEL]
erase entire page
Note:
You set display time and flashing rate for the message page when you use
that particular message in a Sequence.