manualshive.com logo in svg

Vents VUT 300-1 EH EC, User Manual, Page: 8 / 40

Share
Download
Vents VUT 300-1 EH EC User Manual Download Page 8

8

Read the user's manual carefully prior to installing and operating the heat recovery 
air handling unit, hereinafter referred as the unit. 
Fulfil the user's manual requirements as well as the provisions of all the applicable 
local and national construction, electrical and technical norms and standards.
The warnings contained in the user's manual must be considered most seriously since 
they contain vital personal safety information.
Failure to follow the rules and safety precautions noted in this user's manual may 
result in an injury or unit damage.
After a careful reading of the manual, keep it for the entire service life of the unit.
While transferring the unit control the User's manual must be turned over to the 
receiving operator. 
 

Disconnect the unit from power mains prior to any installation, servicing, electric connection 
or repair operations.

Do not operate the unit in the air and dust mixture medium!

Do not operate the unit outside the temperature range stated in the user's manual. 
Do not operate the unit in aggressive or explosive environments.

Do not connect a clothes dryer or other similar equipment to the ventilation system. 

SAFETY 

REQUIREMENTS 

!

!

RESTRICTIONS! 

RESTRICTIONS! 

RESTRICTIONS! 

RESTRICTIONS! 

VUT EH EC

VUT EH EC

WARNING 

WARNING 

Summary of Contents for VUT 300-1 EH EC









































Reviews:

No comments