manualshive.com logo in svg

Vents VUT 300-1 EH EC, User Manual, Page: 21 / 40

Share
Download
Vents VUT 300-1 EH EC User Manual Download Page 21

PROGRAMMING OF 
THE OPERATIONS 
MODES WITH THE 
LCD CONTROL 
PANEL

During rated operating conditions the control panel displays the following parameters: 

Press Escape to get to interface language menu and use the Up/Down buttons to select a 
required language. Press Enter to save the new language setting. If no button is pressed for 
10 seconds or Escape button is pressed the menu language is not changed and the main 
working window is displayed. 
The user menu hat two levels, the main menu and the service menu. Press Enter to get to the 
menu from the main working window. 
Use the Up/Down buttons for navigation in the menu items. Press Escape to return to a previous 
level and to come back to the main working window. Press Enter to enter the next menu item 
and edit parameters. The basic operating parameters are available for editing in the main menu: 

5. "Down" button is used for going down in the list of menu or decreasing the 
current parameter.
6. "Enter" button is used for selection of an editable parameter or moving to a previous 
menu level. In the working window it indicates entrance to the menu.
7. "Escape" button is used for return to higher menu level. In the working window it enables 
to select the interface language. 
8. "Power" button is used to control the unit status (on/off). 
9. Green LED indicator. Its steady glow indicates active status of the unit, its blinking means 
the heater cooling is ON. It is off when the unit is OFF. 

room air 
temperature 

user-defined control 
temperature 

current operation 
mode 

fan speed stage 

heating 
capacity 

clock 

21

VUT EH EC

VUT EH EC

Summary of Contents for VUT 300-1 EH EC









































Reviews:

No comments