manualshive.com logo in svg

Vents VUT 300-1 EH EC, User Manual, Page: 19 / 40

Share
Download
Vents VUT 300-1 EH EC User Manual Download Page 19

Fig

. 9

Socket connector 
for the control panel 

Socket connector for duct 
temperature sensor 

Socket connector for outer 
temperature sensor 

Connect the unit to the power mains 1~230 V/50/60 Hz (for details, refer to connection 
to power mains).The indicator displays the “VENTS” logo, the LED indicators are off.
To activate the unit press the Power button, select On and press the Enter button. 
This green LED goes on, the current operation mode is activated and the control panel 
indicator displays the main operation window information.
To deactivate the unit press the Power button, select Off and press the Enter button. 
The unit switches to the heating elements cooling mode (green LED is blinking) and goes 
off in 2 minutes. The operation parameters are selected and edited via the user menu, 
see the details below.

UNIT 
ACTIVATION/
DEACTIVATION 

UNIT 
CONTROL

The unit is controlled via the remote-mounted control panel. The physical "control panel-unit" 
data transfer channel is performed via a four-core data cable up to 10 m in length. 
The unit has a digital data transfer. 

1

9

Control board 

VUT EH EC

VUT EH EC

Summary of Contents for VUT 300-1 EH EC









































Reviews:

No comments