Warnings & Safety Information
INSTALLATION GUIDANCE
1. The installer is responsible for the installation
and electrical connection of the system on site. It
is the responsibility of the installer to ensure that
the equipment is safely and securely installed
and left only when mechanically and electrically
safe.
2. All regulations and requirements must be
strictly followed to prevent hazards to life and
property, both during and after installation, and
during any subsequent servicing and
maintenance.
3. Certain applications may require the
installation of sound attenuation to achieve the
sound levels required.
4. The unit must not be connected directly to a
tumble drier.
5. The supply air must be drawn from the exterior
of the property.
6. The exhaust grille should be located at least
600mm away from any flue outlet. The inlet grille
should be located 2000mm away from any flue
outlet.
Contents
Section
Page
1.0
Introduction
4
2.0
Site Requirements
5
3.0
Installation
6
4.0
Electrical
8
5.0
Maintenance
10
Disposal
This product should not be
disposed of with household waste.
Please recycle where facilities
exist. Check with your local
authority for recycling advice.
