IMPORTANT SAFETY
INFORMATION
PLEASE READ THESE
INSTRUCTIONS
CAREFULLY BEFORE
COMMENCING
INSTALLATION.
1. Do not install this product in
areas where the following may be
present or occur:
• Excessive oil or a grease laden
atmosphere.
• Corrosive or flammable gases,
liquids or vapours.
• Subject to direct water spray
from hoses.
• Ambient temperatures higher
than 40°C and lower than -20°C.
• Possible obstructions that may
hinder access to or removal of the
unit.
2. All wiring must be in accordance
with the current IEE wiring
regulations BS7671, or appropriate
standards of your country.
Installation should be inspected
and tested by a suitably qualified
person after completion.
3. Ensure the mains supply
(voltage, frequency and phase)
complies with the rating label.
4. The unit should be provided with
a local isolator switch fitted with a
3A fuse capable of disconnecting
all poles and having a contact
separation of at least 3mm.
5. These units must be earthed.
6. Precautions must be taken to
avoid the back-flow of gases into
the building from the open flue of
gas or other fuel-burning
appliances.
7. This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the appliance by
a person responsible for their
safety.
8. Young children should be
supervised to ensure that they do
not play with the appliance.
9. CAUTION: In order to avoid a
hazard due to inadvertent resetting
of the thermal cut-out, this
appliance must not be supplied
through an external switching
device, such as a timer, or
connected to a circuit that is
regularly switched on and off by
the utility.
