9
ATTACH HARNESSES
1.B)
Install venture RS-232 data harness
(
VE1019772
) into the designated
location on UCB and venture.
2.B)
Nest the temperature probe
(
VE1015669
) around the EVAP coil
inside the cabinet .
1.F)
If using a cellular modem , connect
the modem to the venture board in
the first USB port as shown. If not,
ignore this step.
1.C)
Install motion sensor harness
(
VE6822
) into the designated location
on the venture and motion censor.
1.D)
Utilize the three cable clips indicated
above in order to ensure the motion
sensor board (
VE6822
) stays upwards
and doesnt short.
2.C)
Feed the temperature probe
(
VE1015669
) and extension
(
VE1016368
) into the side cabinet.
Connect extension to the control
board as shown.
1.A)
Install venture power harness
(
VE1020737
) into the designated
location on the UCB and venture.
2.A)
Connect UCB temperature
sensor extension (
VE1016368
)
to temperature cable with probe
(
VE1015669
).
1.E)
Install venture speaker
(
VE1019798
) into the designated
port on the back of the venture as
shown.
CAUTION
!
Inspect all electrical connections, making sure they are properly attached to their specified connection points before
powering up machine.
Step 1: Install Venture Harnessing
Step 2: Install Other Harnessing
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
INS
TALL DOOR
DIA
GRAMS
REMO
VE DOOR
ATT
A
CH HARNESSES
Board must point up
Board must point up
www.veii.com
