10
2.E)
Plug door switch harness
(
VE1020990
) into the designated port
on the control board as shown.
3.B)
Route the Ground Wire through the
cable clip indicated above. Ensure the
wire is routed behind the coin chute.
This will help keep the wire tucked
and secure.
2.F)
Plug the OEM door switch into the
designated port on the control board as
shown.
3.C)
Locate the door stud shown above.
Secure the open end of the ground wire
to the stud using (
1
) nut.
2.D )
Connect door switch harness
(
VE1020990
) along with the OEM
door switch harness to the back
ports on the door switch as shown.
3.A )
Locate the cabinet stud indicated in
the picture above. Take the ground
wire that is sourced from the OEM
cabinet and secure it to the stud
using (
1
) nut.
ATTACH HARNESSES
REMO
VE DOOR
INS
TALL DOOR
ATT
A
CH HARNESSES
DIA
GRAMS
Step 3: Install Ground Wire
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
www.veii.com
OEM
VE1020990
*Proceed to the next two pages for UCB & Venture Harnessing Diagrams*
Once install is complete you will need to specify the machine in use using the
program UCB menu.