6
3.A)
Disconnect all Harnesses and the
Ground Wire connecting the OEM
door to the cabinet.
4.B)
Remove the two upper hinge nuts,
then remove the door switch(s) so
it can re-used later.
4.C)
Lift the OEM door off the cabinet
bottom hinge and set aside.
4.A)
Remove Lower hinge nut from the
door.
3.B)
Disconnect all harnesses from
Controller.
3.C)
Remove the OEM Control Board
from the cabinet, retaining the
mounting hardware.
5.B)
Mount the new top hinge (
VE1017933
) to the curve BevMax panel with Washer
(
VE1017455
), bushing (
VE1017454
), and 1/4-20 nut (
VE6023M
).
5. A)
Install the new BevMax control
board (
VE1015694
) utilizing the
retained hardware.
Step 3: Remove Old Harnessing
Step 4: Removing OEM door
Step 5: Mount New controller & New Door hinge
Remove Door
REMO
VE DOOR
INS
TALL DOOR
ATT
A
CH HARNESSES
DIA
GRAMS
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
www.veii.com
Could have 2 door switches
or another variation
