5
1.A)
Unplug machine from power outlet
to prevent electrical shock.
2.B)
Remove screw on top of the OEM delivery port marked in the picture above.
Remove the upper housing to reveal the screws that are used to secure the
OEM delivery port to the door.
2.A)
Remove plastic OEM board cover, exposing the board underneath. Remove the two nuts securing the
electronic housing bracket,
then remove the bracket so that it can be installed later onto the new door.
2.C)
Remove the (4) nuts securing the OEM
delivery port to the door. Set aside for
future use.
WARNING
To prevent personal injury and equipment damage, turn machine off and disconnect electrical cord from the wall outlet
before installing door. Failure to do so could result in electrical shock.
!!
Step 2: Remove OEM Delivery Port
Step 1: Remove existing Pay Systems
1.B)
Disconnect and remove any payment systems currently in the
door, set aside for future use.
REMOVE DOOR
INS
TALL DOOR
DIA
GRAMS
REMO
VE DOOR
ATT
A
CH HARNESSES
VE1021164 - BEVMAX - MEDIA PANEL INSTALLATION MANUAL
www.veii.com