background image

1 - 1

UX-300U

FO-760U

Illustration: UX-300

No. 00ZUX300U/SME

CHAPTER 1. GENERAL DESCRIPTION
[1] Specifications ............................................ 1-1
[2] Operation panel ......................................... 1-2
[3] Transmittable documents .......................... 1-3
[4] Installation ................................................. 1-4
[5] Quick reference guide ............................... 1-7

CHAPTER 2. ADJUSTMENTS
[1] Adjustments ............................................... 2-1
[2] Diagnostics and service soft switch .......... 2-2
[3] Troubleshooting ......................................  2-16
[4] Error code table ....................................... 2-17

CHAPTER 3. MECHANISM BLOCKS
[1] General description ..................................  3-1
[2] Disassembly and assembly
              procedures ....................................... 3-3

CHAPTER 4. DIAGRAMS
[1] Block diagram ............................................ 4-1
[2] Wiring diagram .......................................... 4-2
[3] Point-to-point diagram ............................... 4-3

CHAPTER 5. CIRCUIT DESCRIPTION
[1] Circuit description ...................................... 5-1
[2] Circuit description of control PWB ..............5-2
[3] Circuit description of TEL/LIU PWB .......... 5-8
[4] Circuit description of
            power supply PWB ............................ 5-11
[5] Circuit description of CIS unit ................... 5-11

CHAPTER 6. CIRCUIT SCHEMATICS AND
PARTS LAYOUT
[1] Control PWB circuit ................................... 6-1
[2] TEL/LIU PWB circuit ................................. 6-9
[3] Power supply PWB circuit .......................  6-11
[4] Operation panel PWB circuit ................... 6-13

CHAPTER 7. OPERATION FLOWCHART
[1] Protocol ..................................................... 7-1
[2] Power on sequence .................................. 7-2

CHAPTER 8. OTHERS
[1] Service tools .............................................. 8-1
[2] IC signal name .......................................... 8-4
PARTS GUIDE

CONTENTS

FACSIMILE

 

        UX-300

MODEL 

FO-760

Parts marked with "

" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for

maintaining the safety and performance of the set.

This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

SHARP CORPORATION

SERVICE MANUAL

Summary of Contents for FO-760













Reviews: