Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 19 of 42
C8
FORCE VEND (From Version V1.40)
This parameter is used to prevent the use of the machine as a coin changer. When forced
vend is enabled you can obtain escrow only in the following cases:
- If coins are inserted and a selection is made (full or empty selection is the same).
- If you insert a coin that you can obtained through escrow (coins that go to the tube of
the coinage) and you don’t reach the maximum price.
C8 = 0 Forced vend disabled (default).
C8 = 1 Forced vend enabled.
Note: If a cashless system with reload facility is used, Forced vend can be enabled.
C9
MULTI VEND
This parameter enables or disables automatic change process:
C9 = 0 Multi Vend disabled (change dispensed automatically after vend) (default)
If C9 is set to 0, the max coin acceptance = maximum selection price
C9 = 1 Multi Vend enabled (you can use your change to make another selection,
or to press the coin return button to get your change)
If C9 is set to 1, the max. coin acceptance level must be set in
CCOC>>>ACC
C10 BILL ESCROW MODE
This parameters allows the escrow of bill. If enabled and the last bill inserted takes the
credit over the maximum price, the bill be held in the escrow position, and can be returned
as escrow. If the function is disabled, bills go always to the stacker. The valid values are:
C10 = 0 Bill escrow enabled (default)
C10 = 1 Bill escrow disabled.
C11 EVENT REPORTING MODE (From Version V1.40)
C11 = 0 The Events (EA1&EA2) are reported during a normal DEX readout session.
C11 = 1 As an Event occurs, the VMC will send ENQ to advise a new EVENT is
available, the ENQ will be send every second until DL 0 is received or a
DEX readout session has been performed.
Refer to chapter 2.4 Event Table on page 36
C12 RESERVED FOR FUTURE USE
