Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 26 of 42
NOTE: To remove customized messages automatically in case of wrong prgramming
proceed as follows:
-
Switch off the power supply to the machine.
-
Press button 0 and keep it pressed while you switch on the power supply.
-
Wait a few seconds until you release button 0.
-
All programming message will be restored in English.
-
It is possible to set different languages for customer information and service program.
TIME CONFIGURATION (PROTECTED MENUE)
If ENTER button is activated at the "TIME" prompt the VMC will enter the machine on the
time setting routine with the follow submenu:
-
“ENbX” time status (X = 0 time disable, X = 1 time enable),
-
press enter to modify X value,
-
“YEAR” press enter show actual year, up down modify the value,
-
enter to confirm, home to come back at “ENBX” message,
-
“NTH” press enter show actual month, up down modify the value,
-
enter to confirm, home to come back at “ENBX” message,
-
“DATE” press enter show actual date, up down modify the value,
-
enter to confirm, home to come back at “ENBX” message,
-
“HOUR” press enter show actual hours-minutes, up down modify the value
-
hours, enter to blanking minutes up or down to modify minutes,
-
enter to confirm, home to come back at “ENBX” message,
-
“DST ”daylight saving time, press enter to modify the country,
-
the available values are:
“AUS ” Australian rules
“ EU ” European rules
“ NA ” North America rules
“ OFF ” No daylight saving time
