Programming Manual
GLASSFRONT VENDING MACHINES
Rev. 1.12
MODELLS: G-DRINK SVE GF6 / GF9 – DR6 / DR9
Page 3 of 42
1 SPECIFICATION FOR ELECTRONIC BOARD SF01
HARDWARE FEATURE
Power supply: 24 Volt DC
14
motor outputs 24 VDC 1 A
14
motor micro-switches
14
sold-out micro-switches
14
sold-out leds
26
selections switches
1
Door switch
3
Analogics inputs (for temperature control)
1
Real time clock
1
Jack plug for DEX/UCS audit output.
1
Serial TTL output.
The board uses an XA 16bit microcontroller with up to 4096 Kbit of program EPROM and
256 Kbit of EPROM memory used to store Settings and audit.
External slave board (placed on the box transformer) used to control refrigerant system,
fluorescent tube.
External slave board (placed near main board) used to drive 64 vending motor with
current control and limitation.
External slave Optical detector board used to check the product fall down.
External slave fluorescent display 2 lines 20 characters
Master and Slave optically isolated serial link for MDB
SOFTWARE FEATURE
Service Programming routine (standard ENG,ITA,FR,GERM,SPA)
Possible to have Customize programming & vend messages using WinDEX
Credit Accumulation
Coin Mechanism Interface
Consumer Manipulation and Vend process
Multi pricing
Escrow
Correct change Indicator
Manual Payout
Manual Tubes filling
Saved Error listing - Audit
Cooling unit control by separate electronic control unit
MDB 5 different tubes values
Possible to link selections in up to 10 groups
Slave MDB board controlling the lift and bucket part
