PART 1 - General information
7
Red corner post
Head end
Red corner post
Foot end
Blue corner post
Head end
Blue corner post
Foot end
Turning sheet
Blue bar
Red bar
VENDLET Basic
How VENDLET Basic works
VENDLET Basic is switched on by double-clicking the on
the hand control. VENDLET Basic produce a “beep” upon
activation and the green diode over the power symbol turns
on.
When VENDLET Basic hasn’t been used for 90 seconds, the
system produces a “beep-beep” sound, the diode turns off,
and then VENDLET Basic is turned off.
When VENDLET Basic has been turned on, the bars can be
turned in both directions. The colour coding on the bars
relates to the colours on the hand control buttons.
Press and hold the individual buttons long enough to obtain
the desired operation; the motors will stop when the button
is released. Likewise, you may stop an activated function by
clicking the .
Tighten the sheet
on the blue bar
Slacken the sheet
on the blue bar
Tighten the sheet
on the red bar
Slacken the sheet
on the red bar
Power with
light / stop button
VENDLET Basic hand control
The bars on the VENDLET Basic turn together. If the red bar
pulls, the blue bar starts slackening, and vice versa. If you
don’t want the sheet to be slackened at the opposite bar,
press both
+
simultaneously or
+
simultaneously.
Roll the sheet on
the red bar without
slackening the sheet
on the blue bar by
pressing +
simultaneously
Roll the sheet on
the blue bar without
slackening the sheet
on the red bar by
pressing +
simultaneously
